soap carvings

Carvings of soap or radishes was a big part of "Becoming Naomi Leon" by Pam Munoz Ryan. Apparently, reading about Oazacan wood carvings was where Ryan had her inspiration to write the book in the first place. She says, "I came across a one-line reference to the Night of the Radishes. The event sounded so magical I knew I had to see it. In 1997, on the 100th Anniversary of La Noche de los Rabanos, I visited the romantic and mysterious Oaxaca City, a feast of colors, tastes, pageantry, and festivals. When I began writing Naomi's story and she evolved into a soap carver, my imagination rushed me back to Oaxaca. Or was it Oaxaca's spell that first mesmerized me, and inspired the lioness, Naomi León?"

source: http://www.pammunozryan.com/naomi.html

I personally have never carved anything out of soap or radishes or.. out of material. I've thought about it before. I think it would be really cool. But I wouldn't even know where to begin. It actually seems really hard, and rather intimidating. So I looked up how to do it. The Ivory soap website really breaks it down for newbies.

What You’ll Need to Begin
Soap carving can be simple and inexpensive. You’ll need:
• A large bar of Ivory soap – Ivory's shape and texture are ideal for carving
• A paring knife
• 1-2 orangewood sticks used for manicures
• Pencil and paper for sketching
• Optional – Large tray to hold soap chips from carving Unwrap the soap and let it dry for a day. Scrape off the lettering and any raised edges before beginning.

1. Developing Your Design
Begin with a simple design. Start with solid, basic shapes with simple cuts or extensions. Sketch your idea on paper first.

2. From Design to Soap Carving
• If you have a clear mental picture of your idea or have carved before, you can begin by carving directly on the soap.
• Or, you can use the orangewood stick to outline a rough sketch on each surface before you carve.
• Beginners may want to sketch or use a pre-existing pattern on paper and trace it onto the soap.

3. Begin with Rough Cuts
The actual carvings begin with rough cuts that remove the large parts of the soap not necessary for your design.
• Place the soap on the table or tray.
• If you are right-handed, hold the soap with your left hand and start cutting at the upper right-hard corner. (If left-handed, use the opposite hand.)
• Leave about 1/4" margin beyond your outlined sketch to allow for mistakes and more detailed work later.
• Cut clear through the bar, removing excess soap all the way around.
• ALWAYS CUT AWAY ONLY SMALL PIECES OR SLICES. Soap often breaks if cut in big chunks.
4. Adding the Details
• After the first cuts, you may find it more comfortable to use the knife as if peeling a potato. Continue to stay 1/8" to 1/4" away from your sketch guidelines to allow for finer work later.
• As you work, keep turning the soap, always keeping the shape of the piece in mind. Step back from time to time to look at the entire piece.
• Watch your high points -- those that jut out farthest from the surface -- and your low points -- those farthest in.
• Carve gradually from the high points toward the deepest cuts. Your knife point is useful for this.
• Don't try to finish any one part in detail before another.
• When the piece is almost finished, smooth rough edges with the knife’s edge and mark in details like eyes or ears with the knife tip or an orangewood stick.


5. Polishing
• Allow your sculpture to dry for a day or two.
• Then, rub it with a soft paper napkin, being careful not to break off corners or high points.
• Finish by rubbing it gently with finger tops or palm.


SOURCE: http://www.ivory.com/PureFun_IvoryProjects_SoapCarvingTips.htm